Assoc. Prof. Ronnapee Chaichaowarat, ISE Lecturer, has opened a laboratory to showcase the Wheelchair Exoskeleton.
Assoc. Prof. Ronnapee Chaichaowarat, ISE Lecturer, has opened a laboratory to showcase the Wheelchair Exoskeleton. [ISE in the News] รองศาสตราจารย์ ดร.รณพีร์ ชัยเชาวรัตน์ อาจารย์ประจำหลักสูตรวิศวกรรมการออกแบบและผลิตยานยนต์ จากสำนักบริหารหลักสูตรวิศวกรรมนานาชาติ คณะวิศวกรรมศาสตร์ จุฬาลงกรณ์มหาวิทยาลัย ได้เปิดห้องปฏิบัติการให้เข้าชมหุ่นยนต์ต้นแบบ Wheelchair Exoskeleton สำหรับผู้สูงอายุและผู้มีปัญหาด้านการเคลื่อนไหว ให้สามารถขยับลุกจากการนั่งวีลแชร์ มายืนและเดินได้ในหุ่นยนต์ตัวเดียว ขอขอบคุณแหล่งที่มา : เว็บไซต์ของจุฬาลงกรณ์มหาวิทยาลัย Associate Professor Ronnapee Chaichaowarat, Ph.D., the lecturer of the Automotive Design and Manufacturing (ADME) Program from the International School of Engineering (ISE), Faculty of Engineering, Chulalongkorn University, has opened a laboratory to showcase the prototype robot, the Wheelchair Exoskeleton, designed for the elderly and people with mobility issues. This robot allows them to stand and walk using a single robot. Source: Chulalongkorn University Website For Thai version, please visit this link for more detail : https://www.chula.ac.th/highlight/210855/ For English version, please visit this link : https://www.chula.ac.th/en/highlight/218151/
ISE ADME students and alumni presented their works in IEEE Region 10 Conference (TENCON 2024), at Marina Bay Sands, Singapore.
ISE ADME students and alumni presented their works in IEEE Region 10 Conference (TENCON 2024). ISE ADME students and alumni presented their works in IEEE Region 10 Conference (TENCON 2024), at Marina Bay Sands, Singapore, during December 1 – 4, 2024, under the theme “Artificial Intelligence and Deep Learning Technologies for Sustainable Future”. https://tencon2024.org/ Ms. Phenpasu Kongsonthana, Ms. Popploy Jinnathampong, and Ms. Suwapat Thongyoun, ADME alumni, have presented their paper entitled “The Effect of Latency on the Performance of Remote Driving with Video Streaming”. Ms. Pawarisa Tanpoonkiat, Ms. Chalita Dangkaokiew, Mr. Chairak Uawanapaksa, and Mr. Jeremy Thawornpanich, ADME students, have presented their paper entitled “Gear Ratio and Induced Speed Range of Magnetic Gearbox with Speed and Load Conditions”. Both papers are supervised by Assoc. Prof. Ronnapee Chaichaowarat, Ph.D.
-
Congratulations to Dr. Aung Pyae and his research collaborators for receiving the Top Paper Award at the 3rd NIC-NIDA Conference 2024!
Congratulations to Dr. Aung Pyae from the International School of Engineering and his research collaborators from the Department of Environmental and Sustainable Engineering for receiving the Top Paper Award at the 3rd NIC-NIDA Conference 2024! On 22 August 2024, Dr. Aung Pyae, a lecturer in the ICE programs at the International School of Engineering, was honored with the Top Paper Award for the presentation titled "Design and Development of a User-Centric Mobile Application to Promote Sustainable Hydration and Reduce Single-Use Plastic Water Bottle Consumption: A Case Study of Chulalongkorn University." at the 3rd NIC-NIDA Conference 2024. This research was conducted in collaboration with the Department of Environmental and Sustainable Engineering, Faculty of Engineering, Chulalongkorn University.
-
4th Year Nano-Engineering Students Presented the Project at the IEEE Biosensors Conference 2024
We are proud to announce that our 4th-year Nano-Engineering students, Kittipat Sathitaphiwan, Natchanon Auewetchanichkul, and Thitasiree Kaewparadai, under the guidance of Dr. Porpin Pungetmongkol (ISE), have worked on a project titled 'Sweat Glucose Sensor with SPCE Modified by CuO Nanorods,' which has been accepted for presentation at the prestigious IEEE Biosensors Conference in Cambridge, London, held from July 28 to August 1, 2024. This work has also been published in IEEE Sensors Letters. Please explore their work by visiting the link below: https://ieeexplore.ieee.org/document/10508962
-
Congratulations to Nano-Engineering Students for Wining in the IEEE NANO 2024!
Congratulations to Natchanon Jiwarawat, Thapan Leukulwatanachai, and Kunbhass Subhakornphichan, Nano-Engineering Students for wining in the IEEE NANO 2024! We are proud to announce that our 4th-year Nano-Engineering students, Natchanon Jiwarawat, Thapan Leukulwatanachai, and Kunbhass Subhakornphichan, along with Nano alumni Siwagorn Limwathanagura and Sittinadh Wanotayan, under the guidance of Dr. Porpin Pungetmongkol (ISE), have made significant strides in their research endeavors. Their innovative work, titled “RAPID AND LOW-COST FABRICATION OF GRAPHENE FROM PENCIL LEAD,” has been accepted for presentation at the prestigious 24th IEEE International Conference on Nanotechnology (IEEE-NANO 2024), which will be held from July 8-11, 2024, in Gijón, Spain. Following their presentation, Natchanon Jiwarawat, Thapan Leukulwatanachai, and Kunbhass Subhakornphichan were recognized for their outstanding contribution to the conference with an award in the NANO Student Design Competition (SDC). This accolade highlights their dedication and the high quality of their research. Building on this success, the team further extended their research, culminating in the publication of their work titled "ELECTROCHEMICAL EXFOLIATION OF GRAPHENE FROM PENCIL LEAD" in the journal, Scientific Reports, a Nature publication. We invite you to explore their groundbreaking work at this link (https://www.nature.com/articles/s41598-024-66825-0).
-
ISE organized the ABET Accreditation Preparation Workshop for Nano-Engineering Program
On 6-7 June 2024, ISE organized the ABET Accreditation Preparation Workshop for Nano-Engineering Program, International School of Engineering, Faculty of Engineering, Chulalongkorn University at Neera Retreat Hotel.
-
Dr. Jing Tang was invited to join panel discussion at Thailand Digital Talent Summit.
On May 31, 2024, Dr. Jing Tang, Lecturer of the Robotics and Artificial Intelligence Engineering Program at the International School of Engineering, Faculty of Engineering, Chulalongkorn University, was invited to be a panelist at the Thailand Digital Talent Summit 2024. The summit, a collaborative effort by the Ministry of Higher Education, Science, Research and Innovation (MHESI), the Ministry of Labor, and Huawei Technologies (Thailand) Co., Ltd., was held at the Siam Kempinski Hotel Bangkok. This engagement follows the April 2024 memorandum of understanding signed between Chulalongkorn University and Huawei Technologies (Thailand) Co., Ltd., focusing on digital transformation and talent development within Thailand. Dr. Tang’s participation as a panelist on the critical topic of “Cultivating High-End Innovative Talents for Cloud and AI Development” stems from this strategic partnership and aligns with her research trajectory. Dr. Jing Tang was invited to be one of the panelists together with Assoc. Prof. Yang Ya (Director of Programming and Advanced Computing Innovation Practice Base, Beijing University of Posts and Telecommunications, China), Dr. Thanawat Raibroycharoen (Chief Technology Officer, Netizen, Thailand), Ms. Pitchsinee Piansamai (Senior Cloud Consultant, Huawei Cloud Technology), and Mr. Sorawit Assarattana (Vice President of Thai Programmer Association). The session was moderated by Ms. Voraporn Pangboonyanon (Deputy Director, Learning Service Department, Huawei Thailand).
-
Students from Chulalongkorn University High Altitude Research Club (CUHAR) gave the interview at the Starstuff Podcast by SpaceTH, produced by ThaiPBS.
ชมรม CUHAR ได้รับคำเชิญจาก Spaceth ให้ไปร่วมพูดคุยเกี่ยวกับชมรมและจรวดที่ได้รับเลือกไปแข่งขันที่ Spaceport America Cup ในพอดแคสท์รายการ Starstuff เรื่องเล่าจากดวงดาว ที่ช่อง Thai PBS Podcast เพื่อจุดประกายเทคโนโลยีการพัฒนาจรวดความเร็วเสียงของประเทศไทย ทางชมรมขอขอบคุณทาง Spaceth เป็นอย่างยิ่งที่ได้มอบโอกาสให้ชมรม CUHAR และวงการจรวดไทยได้เป็นที่รู้จักมากขึ้น โดยสามารถรับชมพอดแคสท์รายการ "Starstuff เรื่องเล่าจากดวงดาว ได้ที่ YouTube: Thai PBS Podcast On 27 April 2024, Mr. Tanin Limpabandh and Mr. Mumin Waealee, the members of Chulalongkorn University High Altitude Research Club (CUHAR), gave the interview at the Starstuff Podcast by SpaceTH. The topic was about sharing the experience, including the beginning and development of rocket technology in Thailand. Continue watching the full episode at Thai PBS Podcast Ep1: https://www.youtube.com/watch?v=jPOnSEYmYkM&list=PLOXec4xqLw1Hkt5N5fFy_VNdDTHN3ammB&index=2 Ep2: https://www.youtube.com/watch?v=UhT58NIovhk&list=PLOXec4xqLw1Hkt5N5fFy_VNdDTHN3ammB&index=1 Source: Thai PBS Podcast Contact information: Facebook: CUHAR - Chulalongkorn University High Altitude Research Club Instagram: cu.highaltitude LinkedIn: CUHAR Email: contact.cuhar@gmail.com